http://blog.darklomax.org/?p=36
L'équipement utilisé par le projet est :
MobSenDat Telemetry board,
C'est la plateforme Arduino qui fait de la télémétrie.
http://www.freetronics.com/products/mobsendat
http://www.arduino.cc/cgi-bin/yabb2/YaBB.pl?num=1269669556
NTX2 transmitter module
http://www.radiometrix.com/content/ntx2 25mW
Un meilleur emetteur :
The TX1H transmitter modules offer a 100mW RF output VHF data link in Radiometrix SIL standard pin-out and footprint. This makes the TX1H ideally suited to those low power applications where existing narrow band and wideband transmitters provide insufficient range. Together with the matching RX1 or BiM1R receiver a one-way radio data link can be achieved over a distance up to 10km+ with suitable choice of data rate and antennas. Project Horus 14 using something else
http://projecthorus.org/?page_id=1773
Even better sur autre fréquence
500mW VHF Narrowband Transceiver
Frequency:151.300MHz (special 120MHz to 180MHz)
The BiM1H transceiver modules offer a 500mW RF output VHF data link in Radiometrix transceiver standard pin-out and footprint. This makes the BiM1H ideally suited to those low power applications where existing wideband transceivers provide insufficient range.
Features
- Standard frequency 151MHz band
- Other frequencies from 120MHz to 180MHz
- Data rates up to 3kbps for standard module
- Usable range over 10km
- Fully screened
- Feature-rich interface (RSSI, analogue and digital baseband
- Low power requirements
Aucun commentaire:
Enregistrer un commentaire